Yeswelder YWM-211P, Operator'S Manual, Page: 13 / 40

8 3 4
5 6 7
1
11
12
13
14
2
9
15
16
17
18
10. Wire Drive Polarity Lead-Permits configuring the wire drive to positive or negative polarity by inserting it into the positive or
negative receptacle. Ensure the connector is locked into place tightly by turning clockwise.
11. Gun Connection (Euro Connect)-Permits attachment of a MIG welding gun. Ensure the gun is fully seated into the brass
receptacle.
12. Spool Gun Trigger Connector Receptacle-Permits triggering the machine for aluminum MIG. Connect the 2-pin connector
present on the welding gun to the receptacle.
13. Positive Output Receptacle-Permits attaching a work lead, electrode holder or the wire drive polarity lead to DC positive. Turn
clockwise to lock it into place.
14. Negative Output Receptacle: Permits attaching a work lead, electrode holder, or the wire drive polarity lead to DC negative.
Turn clockwise to lock it into place.
15. Power Switch: Turns the power on and off to the machine.
16. Gas Inlet: Shielding gas connects to this inlet (gas fitting is 5/8"-18 RH).
17. Input Power Cable.
18. Fan.
- 9 -
10