17
16
Digital Satellite Receiver
Digital Satellite Receiver
USER’S MANUAL
USER’S MANUAL
(7)Limits Disable
Select disable limits by using OK key
(8)Go to reference
Select go to reference by using OK key
(9)Store and Exit
Please select “Store” and the present position will be saved.
2) USALS (DiSEqC 1.3)
(1)Satellite Position
It points out the position of saved satellite. You
can change the position of the satellite by nu-
meric keys
(2)My Longitude
Please input local longitude by numeric keys
(3)My latitude
Please input local latitude by numeric keys
(4)Reference position
This is same as DiSEqC 1.2 reference
(5)Move
The satellite’s position of (1) and the one calculated by value of (2) & (3) will be
shown. Press OK key and it will move.
(6)Store
Please select “Store” and the present position will be saved.
1.2.7 Set FAT-CAS
Select searching type among ALL, FTA or CAS.
1.2.8 Search Type
Select searching type among Radio, TV or All.
Option DiSEqC box
There are two kinds of different ways to scan satellite depending on LNB type.
(1) For universal LNB.
Select a DiSEqC number to which the RF signal is fed the LNB.
(2) For standard LNB.
For low band scanning, “set 22KHz” to off and select a DiSEqC number.
For high band scanning, “set 22KHz” to off and select a DiSEqC number.
1.2.5 LNB POWER
Set LNB power ON/OFF.
1.2.6 Position Set
It is used to set the DiSEqC 1.2 motor & USALS
If you have no positioner equipment, select OFF. Otherwise you can select either
DiSEqC 1.2 or USALS.
1) DiSEqC 1.2
(1)Current position
The default value.
(2)Movement
Select East / West by using
keys and press
OK to stop
(3)Nudge East / West
Select nudge East / West and press OK to save
current position
(4)Recalculation
If it is used to shift the position for all the satellites. Recalculation by using OK key
and then makes above movement function
(5)East Limit Set
Move the position to the most eastern position and press OK to store it.
(6)West Limit Set
Move the position to the most western position and press OK to store it