Yess CDVB2500, User Manual, Page: 8 / 15

15 14
Digital Satellite Receiver Digital Satellite Receiver
USER’S MANUAL USER’S MANUAL
2). Then press RED color key to execute
scanning.
3). During the searching, newly searched chan-
nels will be sorted automatically into two
categories: TV and radio.
1.2 Advanced Installation
In this section, you can press Red color key on the RCU to search channel of the
selected satellite. And press Green key to search by Sky mode.
You can also set parameter for the selected satellite. First select the satellite that you
want to scan. Then move cursor by using OK key to set parameter.
1.2.1 LNB type
Select proper LNB type using keys accord-
ing to your physical LNB type.
Universal 1 (9750MHz & 10600 MHz)
Universal 2 (9750MHz & 10750 MHz)
Universal 3 (9750MHz & 11300 MHz)
Single- SL (5150MHz & 5750 MHz)
Single- SH (5150MHz & 5750 MHz)
1.2.2 LNB Local
When the required LNB frequency is not available, select “Standard” and then input
the frequency value with the numeric keys.
1.2.3 22KHz
When you are using a Dual LNB or two antennas connected to a 22KHz tone switch
box, set 22KHz tone switch “ON” or “OFF” mode.
1.2.4 DiSEqC
Full DiSEqC
If DiSEqC switching box is used in this receiver, select the port number to get the RF
signal from the LNB, which is connected, to DiSEqC switching box.
THE MENU OPERATION
Once you have installed and connected the cables of the receiver, press menu key
on the RCU to display the Main Menu.
This menu consists of 4 menu options as shown below.
™
Installation
™
Manage Channel
™
User Setup
™
Information
™
Games
Use the keys to move the cursor up or down in the menu.Use the OK key to
confirms a selection.
To escape the menu system at anytime, press EXIT key on the RCU.
OPERATION
1. Installation
1.1 Automatic Search
User can scan all transponder of selected satel-
lites in the menu.
Select the Automatic Search option in the main
menu, and press OK to enter the Sub-menu.
1). Select wanted satellite by using keys
and press OK key. The selected satellite will be
marked with the symbol . User can select more
then one satellite by the same way.