5
6
7
8
9
11
13
12
10
III. Installation angle for PIR alarm camera
Floodlight
: will turn on automatically in the darkness when
PIR sensor was triggered.
PIR (passive infrared) Sensor
: detect objects in its view field.
3.6mm Lens
: provides wide viewing angle up to 90°;
Weatherproof IP66 Housing
: working temperature: -20
℃
/-4
℉
to 60
℃
/140
℉
;
2-Axis Mounting Bracket
: adjust installation angle and
vandal-proof inside cable. 360° all-round swiveling and 90°
up-down adjusting;
RJ-45 Ethernet port
: A: Add the camera to YESKAMO
NVR recorder as a standard NVR kits if you want
B: Wired connect the camera to internet if you are you
failed to congurate it for wireless connection
Power-in Port
: connect with provided 12V 1A plug for
power supply.
TF Card slot
: Insert TF Card for video storage. (Max
support 128G TF Card, TF card must be FAT32 format)
Reset button
: Press and hold reset button about 5-10
seconds to restore camera to factory setting.
The detect angle for PIR Sensor is about 110 degree, and
detection distance is within 8 meters. So the recommended
installation height is Not higher than 3-4 meters, 3m/10ft
will be better, and recommended angle is transverse-
ly-mounted with the PIR detection area. (Make the detection
area as a sector area like below picture shows)
-3-
Summary of Contents for TJ06-3MP
Page 2: ......
Page 25: ...Note the phone and camera must be within same wi environment if you choose LAN scan 23...
Page 35: ......
