The time interval for floodlight is about 2 minutes.
If someone beyonds the PIR detection area, it will not
trigger the PIR sensor. So please kindly check the installation
height and angle for PIR alarm camera.
Please check whether you choose “infrared” mode for
camera. (Refer to “6-2 Mode Selection” )
On device setup> advanced setting>video image settings>-
mode> choose “Full Color” > click to save setting, then the
floodlight will switch on and offer full color video. (Refer to
“6--5 video image settings ”)
Please check whether camera has power supply. (Cover the
IR-cut filter of camera and IR led will turn on in the darkness)
Please check whether the camera is installed within your
router’s wifi range
Maybe the camera restore to factory setting, please
configure camera on phone app again.
The default username for camera is“admin”, default
password is no password, leave it empty is ok.
If you want to reset password of camera:
Q11.Where I can change the password for camera?
Q10.Why my camera shows “offline” on phone app?
Q8.Why the floodlight doesn’t turn on when someone
passby?
Q9.How to do if I want the floodlight to turn on all
time at night?
The floodlight only turns on at night (when IR leds are
activated) when PIR alarm camera detects people and both PIR
sensor and motion sensor are triggered. It will not turn on at
day time.
-27-
1
2
3
4
1
2
3
Summary of Contents for TJ06-3MP
Page 2: ......
Page 25: ...Note the phone and camera must be within same wi environment if you choose LAN scan 23...
Page 35: ......
