Yerf-Dog 3204, Owner'S Manual

Page: 13 / 22

Front
square
mounting
holes of
seat frame
Rear
square
mounting
holes of
seat frame
13
Insert carriage bolts (18) through each of
the front square mounting holes of seat
frame, and through the front square
mounting hole of each seat adjustment
rail (76).
Place nut (60) on end of carriage bolts
(18) but do not tighten yet.
Insert carriage bolts (18) through each of
the rear square mounting holes of seat
frame; through mounting hole of each male
seat belt (77), and through the rear square
mounting hole of each seat adjustment
rail (76).
Place nut (60) on end of carriage bolts
(18) and tighten all 4 nuts (front and rear).
STEP 2
Note: Make sure the
seat belts are extending
to the outside of the seat frame.
To move the slide on
the rail with the
adjustment lever,
press outward on the
lever.
The seat rail slides
on seat adjustment
rails (76) can be
moved forward or
backward for access
to the rear or front
square mounting
holes.
TIP
For ease of assembly,
lay the seat frame on a
table, with the seat
back plate down, and
seat bottom coming
up away from the table.
seat
back plate
seat
bottom
Attach the two female seat belt ends
(77) to the tab at the rear center of the
seat frame with bolt (11) and nut (57),
as shown at left. Tighten securely.
STEP 1
SEAT FRAME ASSEMBLY INSTRUCTIONS