Yerf-Dog 3204, Owner'S Manual

Page: 11 / 22

11
1. Locate the SHOCK
ABSORBERS (78) at the front
and rear of the Go-Kart.
2. The factory pre-set the
SHOCKS for normal operating
conditions.
3. Locate the SHOCK
ADJUSTMENT HOLE at the
base of the spring.
4. Place the end of a narrow
screwdriver in the SHOCK
ADJUSTMENT HOLE.
5. Turn the SHOCK
ADJUSTMENT HOLE counter-
clockwise around the SHOCK to
decrease shock absorption.
6. Turn the SHOCK
ADJUSTMENT HOLE clockwise
around the SHOCK to increase
shock absorption.
7. Experiment with the
adjustment until the desired effect
is attained.
SHOCK ABSORBER ADJUSTMENT
STEERING WHEEL ASSEMBLY INSTRUCTIONS
Slide 1/4” Hex Bolts (9) through holes in
steering wheel. Insert Assembly through holes of
steering shaft. Attach with 1/4” (55) Nylock Nuts.
Tighten all bolts/nuts. Place steering wheel cap over center of
steering wheel. Attach with phillips head screw (A).
Item#
9
55
A
Description
Bolt: 1/4”-20 x 1-3/4”
Nut: 1/4”-20
Screw QTY
3
3
1
STEERING WHEEL HARDWARE