7
Example: Connection interval is 3 hours and the device is sleeping. The last
connection was at 12:00. The user taps the locate accurately button at 12:01. Tracking
starts at 15:00 except if the device starts moving before that, in which case the
tracking starts immediately after detecting the movement.
3.2 Accuracy
Accuracy of the position can be checked by tapping the location pin on the map. 2 km
means that the real position is not in the center of the red circle but anywhere within
the radius of 2 km.
A typical GSM tower accuracy is from a few hundred meters to several kilometers.
Whereas GPS accuracy is typically around 5-20m and Wi-Fi 20-50m.
Note: In some cases, GPS signal reflections and interference might cause the location
to shift a little- called drift. These reflections might happen if the device is indoors, by
water, or around tall buildings.
3.3 History
The History view lets you check the tracker’s previous states and locations either on a
list or map view.
You may filter the history data by selecting a date/time range. Locations can be also
connected into a route by lines with direction arrows. The history data can be viewed
backwards until the moment the device was paired.
Symbol explanations:
Note: Wide date range and inaccurate locations may cause the route to look not clear.
Note: If you want to receive better route information, we recommend using Constant
tracking. In Constant tracking mode, the Smart Tracker sends its accurate location at
regular intervals.
Filter history data by date and time.
View the history data on map.
View the history data on list view.
Connect the locations into a route by lines with direction arrows.
Set date and time to filter history data.
