6
International use
If you want to use your tracker outside EU, USA, Russia or China, you must buy a
roaming package via the app or yepzon.com/roaming. Price depends on country and
length of visit.
Note: Please check yepzon.com/roaming for covered countries.
2.4 Power off and restore
Turn off the Yepzon
The Yepzon device can only be turned off from the Yepzon App. This is only required
in rare circumstances (e.g. during flight).
Note: After shutdown, the tracker must be plugged in to charge to turn back on.
Create restore link
You can request a restore link that enables you to reset your Yepzon. The reset simply
removes all the connections between Yepzon and any smartphone or tablet it has
been connected to. Your e-mail address is not collected, saved or used by Yepzon for
anything else than sending the reset link.
3 Location
3.1
Locate accurately
Yepzon One 2.0 uses GSM, GPS and Wi-Fi for positioning.
By default, the app always displays the last known location based on either GSM cell
towers or Wi-Fi hotspots.
Yepzon One 2.0 locates accurately on demand. To activate the GPS/Wi-Fi positioning,
tap Locate accurately. Time for accurate positioning to start depends on connection
interval settings. The waiting time is the connection interval at maximum. Each
session lasts for a few minutes and can be repeated sequentially as many times as
needed.
If GPS signal is not strong enough (e.g. indoors) and Wi-Fi hotspots are not present, a
rough position based on GSM towers is shown.
Example: Connection interval is 5 minutes. The last connection was at 12:00. The user
taps the Locate accurately button at 12:01. Yepzon starts tracking after four minutes,
at 12:05.
