19
6.11 Programming function
The Programming is the function for input of the data such as Frequency/Tone/Scan into the Radio.
* Programming Method
First, please prepare the Program cable for XR-150/XR-450 Series Radio.
①
Press the
“P”
button of the Radio to turn on. Then, the
–Prog-
message is displayed.
②
Connect the Programming cable to the Ear/Microphone Jack of Radio.
③
By using the PC Program, store the data and after disconnecting the cable, turn off the power and
turn on the power again.
Figure 6-12) Program Screen
6.12 Cloning function
The CLONING is to copy the data such as Frequency/Tone/Scan into the other Radio.
* Cloning Method
①
First, please prepare the Clone cable for XR-150/XR-450 Series Radio.
②
The original Radio should be turned on with pressing the
PTT button
and the Radio
to be copied should be turned on with pressing the
“ P “ button
.
③
The original Radio displays
–CLON-
message
,
and the Radio to be copied displays
–Prog-
message.
④
Connect the Clon cable to the Ear/Mic Jack of 2 Radios.
⑤
If pressing the
"Enter" button
of the original Radio, the copy is made and after completing, please
disconnect the cable and turn off & on the power of the 2 Radios. Finally please use the Radio after
checking if the copy is made without problem.
☞
Caution) If the Cloning is made into the other brand’s Radio, a malfunction can happen.
Figure 6-13) CLON Screen
Summary of Contents for XR-150
Page 29: ...29...
