13
The continuous rapid discharge (for example, when making a short circuit on the
‘+’ terminal of battery by a metal substance) may make a fatal defect and the
battery can be exploded. Also, it can cause a fire.
4) Using the correct battery will improve the efficiency and safety.
5.2 The Time of Charging
Low battery voltage will make the radio less coverage and also make the performance worse. Please charge
the battery in case of following:
1)
When you think performance of the radio becomes lower
2)
When the red lamp on RX/TX Led blinks (every 0.5 second) during transmission or reception
3)
When the battery icon blinks
4) When “beep” sound is generated while the radio is in use.
5.3 How to Charge
1) Plug the DC-1000 charger into the electricity power outlet.
2)
When charging the Radio with the battery installed, please turn off the power of the Radio and
place the Radio on the charger (The charger has a slide slot.).
3)
After completion of the charging, the green LED on the charger will light. However, please
continue the charging for 30 more minutes for the complete full charge.
status
LED indication
status
LED indication
During charging
Red LED lights.
Detecting error
Red LED is off.
After charging
Green LED lights.
When charging
Green LED lights
5.4 Charger (DC-1000/DC-2000)
The DC-1000/DC-2000 charger is designed to charge only the Li-ion battery enclosed in this Radio.
Figure 5-2) Chargers for XR-150/XR-450 Series
Summary of Contents for XR-150
Page 29: ...29...
