The DART/DARTMOOR
is suitable for both Cla
s
s 1 and 2 flues (the Building
Regulations
1984)
The appliance is also suitable for pre-cast flues, pre
-
cast chimne
y
block, pre-cast flue block
and ridge tile vent
I t is the responsi bility of the installer to ensure that the flue to be connected
is suitabl
e
for
the conditions
experienced
when burning natural or LPG gas.
Ideally it is recommended
that a minimum
height of 610mm from the stove should be
established
before any significant change in the direction of the flue.
Horizontal
or
negative gradients in the flue pipe should be avoided.
It is recommended
that the flue has a minimum
height
of 3 meters
.
Prior to installation
the install
e
r should ensure that the flue is free from obstruction
and ideally a chimney
should be swept and subsequently
smoke tested
.
Ensure that an
y
dampers are fixed in a
permanently
open position
,
and that the chimney
/
flue
is, in the professional opinion of
the installer, of an overall suitability for the purpose intended
.
The DART
/
DARTMOOR
has no requirement
for additional ventilation
in the room in
accordance
with BS 5871 part
H
.
FIREGUARD WARNING
THE WINDOW AND FRAME ON THIS APPLIANCE ACTS AS A
FIREGUARD CONFORMING TO BS:1945 - 1971 AND SATISFIES THE
HEATING APPLIANCE (FIREGUARDS) REGULATIONS 1991
.
NO PART OF THE WINDOW OR FRAME SHOULD BE PERMANENTLY
REMOVED
IT DOES NOT GIVE FULL PROTECTION FOR YOUNG CHILDREN OR
THE INFIRM
4
ARRANGING THE LAYOUT OF THE COALS
Yeoman Stoves accept no responsibility
for any injury sustained whilst handling
hot
ceramics.
57767
