Using the Yellowbrick V3 – The Basics
This section outlines the Yellowbrick V3 Two-‐Way Messenger’s
capabilities and describes how to utilize them when in the field
Device Orientation, Set-‐up and Key Features
User Interface
Yellowbrick V3’s user interface consists of a mono display and 5
buttons. One alert button, and four navigation buttons. The Yellowbrick
V3 is designed to be used in conjunction with either the YBlog system
(for individual use) or the Yellowbrick Back-‐Office system (for
corporate use).
Orientation
Your Yellowbrick V3 is equipped with both Iridium & GPS antennas
located in the top of your device. For the best results it is important to
be mindful of the orientation of your device when in use. To ensure
good satellite signal, the antennas should be clear of obstructions and
have a clear view of the sky.
Examples of obstructions include a heavily wooded area or inside a
vehicle or building. Environments such as these offer very little, if any
view of the sky. In these instances, it would be best to reposition your
device so that it can have a clear view of the sky, such as in a clearing,
on the dashboard or rear window of a car or on a windowsill.
Once switched ON, your Yellowbrick V3 will try to obtain a GPS signal.
The time taken to obtain a signal will vary from few minutes when the
device has never been used or not been used for a while to few seconds
when the device is regularly used.