yellow jacket CA502 User And Maintenance Manual Download Page 50

Page: 50 / 68

SUB MENU

DESCRIPTION

Sensors

Displays the information on the state and calibration of the electrochemical sensors and

provides the ID data of the sensor:

Code

Serial number

Gas and Range

Measured currents (to perform a quick diagnosis in case of malfunction).

SEE CHAPTER 13.1.1.

Gas probe

Tests the tightness of the gas probe pneumatic path for potential leaks or possible damage.

SEE CHAPTER 13.1.2.

Hardware

If a malfunction occurs, before contacting the Customer service, collect and/or send the data

present in this menu.

SEE CHAPTER 13.1.3.

15/06/18 10:00

DIAGNOSTIC

►

Sensors

Gas probe
Hardware

KEY

FUNCTION

Returns to the previous screen.

Selects the available parameters.

Enters in the selected parameter.

ESC

13.0

DIAGNOSTIC

13.1

Menu

→

Diagnostic

Summary of Contents for CA502





































































Search results

Summary of Contents for CA502

Reviews:

Related manuals for CA502

Brands by name

Popular brands

yellow jacket CA502, User And Maintenance Manual

Search results

Summary of Contents for CA502

Reviews:

Related manuals for CA502

Brands by name

Popular brands