3
M
AINTENANCE
&
T
ROUBLESHOOTING
3.1
Setting the Elevation
During
the initial power-up, the YELLOW JACKET Refrigerant
Identifier will indicate that the elevation has not been set. To
set the elevation, press the “Help” button on the “Ready to Air Cal”
screen as shown in
Section 2.2
,
Figure 3
. The screen will display
several options as shown in
Figure 20
. Pressing the “SET” button
will display the options in
Figure 21
.
TO CHANGE
SETTINGS OR
REPLACE PAPER
ROLL PRESS SET
FOR OTHER HELP
PRESS HELP
SET HELP DONE
TO FEED IN A
NEW PAPER ROLL
PRESS FEED
PRESS SET TO
ADJ LCD CONTRAST
OR ELEVATION
SET FEED DONE
Press the “SET” button shown in
Figure 21
to display the screen
options shown in
Figure 22
. Pressing the “ELEV” button will take
you the elevation screen shown in
Figure 23.
Use the “UP” & “DOWN”
buttons to adjust the unit to the elevation in your area. Press the
“SAVE” button when finished to return to the help screen
(Figure
20)
.
TO SET THE
ELEVATION PRESS
ELEV BUTTON
TO SET THE
LCD CONTRAST
PRESS CONT
ELEV CONT DONE
FEET
400
METERS
122
UP
DOWN SAVE
Figure 20
Figure 21
Figure 22
Figure 23
17
