background image

Fade

 

mode

 

2

 (

faster

)

To run

 

the

 

color

 

fading

 

mode

 

2, do the following:

1.Press <MENU> repeatedly until Cp01 shows on the display.

2.Press <ENTER>.

3.Use <UP> and <DOWN> to  increase or decrease the program 
   speed

(

Cp01

-

Cp99

)

4.Press <ENTER>.

Hopping

 

mode

To run

 

the

 

hopping

 

mode, do the following:

1.Press <MENU> repeatedly until Cj01 shows on the display.

2.Press <ENTER>.

3.Use <UP> and <DOWN> to  increase or decrease the program 
    speed

(

Cj01

-

Cj99

)

4.Press <ENTER>.

Strobe

 

mode

To

 

run

 

the

 

strobe

 

mode

 

on

 

36LEDs

 

Par

 

Light

follow

 

the

 

instructions

 

below

:

1.Press <MENU> repeatedly until Ct01 shows on the display.

2. Press <ENTER>.

3.Use <UP> and <DOWN> to  increase or decrease the program 
    speed

(

Ct01

-

Ct99

)

4.Press <ENTER>.

Master/Slave Mode (wired)

The Master/Slave mode allows a single 36LEDs

 

Par

 

Light product 

(the “master”) to control the actions of one or more 36LEDs

 

Par 

Light products (the “slaves”) without the need of a DMX controller. 
The master product will be set to operate in

 

any Stand-Alone 

mode, while the slave products will be set to operate in Slave

-11-

Summary of Contents for 36LEDs

















Reviews: