20
EN
contact your dealer for more information or care. If the product, a component, or the
battery are worn out, please contact an authorised service centre to repair or recycle
your product.
PERIOD MAINTENANCE AND CHECKS:
CHARGER
Ensure that the charger cord is not damaged and that the wires are not
exposed to avoid short circuits. The input and output sockets must not be
damaged or deformed.
When using the battery charger, it is important to follow the instructions on the label.
WARNING:
Only use the
charger supplied with the product.
BRAKES
Before each use, check that the brakes are in perfect working order. Check the
brakes regularly to prevent accidents due to brake malfunction.
The brake lever (depending on the model) must not come into contact with the
handlebars and the cables must not be bent at a sharp angle so that the cables
slide with minimum friction. Damaged, frayed or rusty cables must be replaced
immediately.
CAUTION:
The surface of the brakes can become extremely hot during
and after operation. You may suffer burns if you come into contact with these hot
surfaces.
CAUTION:
In rainy or wet weather, braking distances are extended.
VIBRATION:
When using an electric scooter, vibration can occur due to a variety of
factors such as road surface quality, tire condition, scooter speed, and suspension
quality. Uneven or rough roads, poorly inflated or damaged tires, high speeds, and
poor suspension can all contribute to vibration on the unit.
CABLES
Make sure that the cable ports are not loose or broken.
SCREWS
Check the screws in the main components and tighten them regularly. Riding the
device causes vibrations that loosen the screws over time.
4.3. CLEANING YOUR DEVICE
Follow these instructions and precautions for cleaning the device:
• Unplug all the device’s charging cables before cleaning it.
• Never immerse in water.
Summary of Contents for 80n
Page 2: ......
Page 21: ...23 EN...
