yeep.me 80n, Manual

Page: 13 / 22

15
EN
3.6. CHARGING AND BATTERY INDICATOR
Charge the battery before first use. To do this, please charge this unit using the
supplied charger .
CAUTION : All charging operations must be performed with the original charger
(charger part number listed in the “CONTENTS AND TECHNICAL DATA” section)
supplied with the unit.
The external flexible cable of this transformer cannot be replaced; if the cable is
damaged, the transformer must be disposed of.
If in doubt, lost or malfunctioning, do not charge the unit with another charger. A new
one should be obtained from your dealer. You will find the email of the support to
contact on the last page of the warranty manual.
BATTERY SWITCH BUTTON :
The device is equipped with a battery switch button located next to the charging port
that serves two purposes:
1. Preserve the battery when the product is switched off.
2. Act as a second safety device in case of an untimely start using the ON/OFF button
on the handlebar.
CAUTION: The battery switch must be activated again in order to restart the device.
Battery switch button (long-term storage):
CAUTION: The battery will drain even when the product is switched off. This button
reduces the power consumption when the product is switched off to preserve the
battery for longer. However, it is important to recharge your device regularly as
described in this manual. In either position, this button does not prevent the product
from charging. It must be in the ON position for the device to work. It also serves as
an additional safety device against accidental start-ups.
NOTE: We recommend that you use the battery switch button if you are not going to
use the device for an extended period of time (more than 7 days). If the battery is not
recharged monthly or switched off using the battery switch, the battery may go into
deep sleep and be damaged. The damage and repairs this may cause are not covered
by the compliance warranty.
WARNING: The device must be unfolded and on its stand for charging to avoid dam-
aging the charging plug.
1.
Remove the charging port cover and ensure there is no water or any other liquid