3.Charging
1. Insert the USB charging cable into the Type-C charging port at the bottom of the lamp,
and then turn on the power. The bottom charging indicator shows red to indicate that
the battery is being charged, and the indicator will turn off when the battery is fully
charged.
2. If the lamp does not respond when turning the bottom switch to "On" or "Breathe",
please charge the lamp first and wait for a few minutes before starting to use it.
Low battery alert: When the battery of the product is low, the light enters the fast
breathing state, the process will last nearly 20 seconds, please charge the product in
time.
Note: When the product is not used for a long time, please charge the product regularly.
When the product has been in a state of power loss for a long time, please charge it
continuously for more than 10 minutes before use to avoid insufficient voltage, which will
affect normal use.
1.The lamp does not come with a power adapter, please use a DC5V/1A power
adapter that meets the safety requirements for charging.
2.Do not use the power adapters or other devices with an output voltage greater than 5V
for charging.
Notes:
3.The product shall be supplied with a certified independent SELV LED driver
complying with IEC/EN. 61347-2-13 with output voltage (5V)and at least equal
to the rated power of this product.
