YEEFERM DBLD120 Instruction Manual Download Page 8

The lower the gauge number, the heavier the cord. 
Do not place any object on top of the charger or place the charger on a soft surface that might block the 
ventilation slots and result in excessive internal heat. Place the charger in a position away from any 
heat source. The charger is ventilated through slots in the top and the bottom of the housing. 
•Do not operate the charger with a damaged cord or plug.
•Do not operate the charger if it has received a sharp blow, been dropped or otherwise damaged in any
way. Take it to an authorized service center.
•Do not disassemble the charger; take it to an authorized service center when service or repair is
required. Incorrect reassembly may result in a risk of electric shock, electrocution or fire.
•Disconnect the charger from the outlet before attempting any cleaning. This will reduce the risk of
electric shock. Removing the battery pack will not reduce this risk.
•NEVER attempt to connect 2 chargers together.
•The charger is designed to operate on standard 120V household electrical power. Do not attempt to
use it on any other voltage. This does not apply to the vehicular charger.

       

WARNING: 

Shock hazard. Do not allow any liquid to get inside the charger. Electric shock may 

result.

 

       

WARNING:

 Burn hazard. Do not submerge the battery pack in any liquid or allow any liquid to 

enter the

 

battery pack. Never attempt to open the battery pack for any reason. If the plastic housing of 

the battery

 

pack breaks or cracks, return to a service center for recycling.

       

CAUTION: 

Burn hazard. To reduce the risk of injury, charge only 

YEEFERM

 rechargeable battery

 

packs. Other types of batteries may overheat and burst resulting in personal injury and property

 

damage.

        

NOTICE:

 Under certain conditions, with the charger plugged into the power supply, the charger 

can be

 

shorted by foreign material. Foreign materials of a conductive nature, such as, but not limited to, 

grinding

 

dust, metal chips, steel wool, aluminum foil or any buildup of metallic particles should be kept 

away from

 

the charger cavities. Always unplug the charger from the power supply when there is no 

battery pack in

 

the cavity. Unplug the charger before attempting to clean.


6

Summary of Contents for DBLD120

















Reviews: