Yedoo OOPS AMBULANCE, User Manual, Page: 10 / 96

10
6.
Protective pad installation
(One Too)
Place the soft protective pad from
washable nylon over the handlebar
stem.
5.c
6.a
5.d
6.b
In case the brake pad is touching
the wheel when turning, symmetrically
adjust the distance of brake arms by
the tightening screws (
3 ).
Protective pad installation
(YooToo, TooToo, 112)
Turn the neoprene cover bottom side
up, slip it below the handlebar (
1 ) and
fasten the press stud around the neck
of the stem (
2 ).
Turn the cover over the handlebar ( 3 ).
Turn the side slip around the column
of the stem and fasten the press stud.
Fasten the end of the brake cable in
the lock and secure with the cable tie,
then trim the tie.
3 3
1
2
3
EN
Assembly Instructions