- 3 -
2.
Spark Plugs
Parts List
Set No. : 5FL-R045Q-70 (R0045Q-10, 4 plugs)
CAUTION :
Since these spark plugs have a copper gasket, caution is needed during
installation on the following points.
1. The tightening torque is 1.0 – 1.2 kg·m.
2. When not checking the torque, tighten by rotating through only 30° after
manual tightening in the case of new plugs. When reusing plugs, tighten by
rotating through 15°.
3.
AIS Plug Set (5VY-A4890-70)
This plug set is used when the AIS (Air Induction System), an exhaust gas purifying
system, is removed.
Parts List
Installation
1. Remove the hose attached to the cylinder head cover and the air cut-off valve
accompanying the hose.
2. Remove the cap fitted to the hose, remove the reed valve and plate from inside.
3. Install the plate (5SL-1482L-70) in replacement of the cap. Apply liquid gasket to
the plate.
4. Remove the cylinder head cover and the four collars fitted to the cover. Install the
PIN (93608-16M16).
5. After removing the hose connected to the air filter casing form the air cut-off
assembly, insert the PLUG (90336-10020) onto the side of the air filter casing to
close the opening.
No.
PART No.
PART NAME
Q’TY
REMARKS
1
5
FL-94700-70
PLUG, SPARK
1
NGK R0045Q-10
No.
PART No.
PART NAME
Q’TY
REMARKS
1
5SL-1482L-70
PLATE
2
*
2
93608-16M16
PIN
4
*
3
93306-10020
PLUG
1
Reused (15°)
New gasket
(30°)
