![background image](http://html.mh-extra.com/html/yeastar-technology/yeastar-te200/yeastar-te200_user-manual_909665025.webp)
NeoGate TE200 User Manual
25/42
or "never" to disable entirely. If you are in Israel, the following is important: As
Bezeq in Israel doesn't like the B-Channel resets happening on the lines, it is
best to set the reset interval to 'never' when installing a box in Israel. Our past
experience also shows that this parameter may also cause issues on local
switches in the UK and China.
·PRI Indication
Tells how Device should indicate Busy () and Congestion() to the switch/user.
Accepted values are:
inband: Device plays indication tones without answering; not available on all
PRI/BRI subscription lines .
outofband: Device disconnects with busy/congestion information code so the
switch will play the indication tones to the caller. Busy() will now do same as
setting PRI_CAUSE=17 and Hangup().
·Remote Dialplan
Called number type
·Remote Number Type
Called number identification
·Location Dialplan
Calling number type
·Location Number Type
Calling number identification
Screen Indicator(SI)
The SI provides information on the source and the quality of the provided
information.
.Presentation Indicator(PI)
The PI provides instructions on whether or not the provided calling line identity
is allowed to be presented, or indicates that the number is not available.
·Nsf
Used with AT&T PRIs. If outbound calls are being rejected due to "Mandatory
information element missing" and the missing IE is 0x20, then you need this
setting
4) Caller ID Prefix
·International Prefix
When there are international calls coming in via this BRI trunk, the International