![background image](http://html.mh-extra.com/html/yeastar-technology/yeastar-te200/yeastar-te200_user-manual_909665013.webp)
NeoGate TE200 User Manual
13/42
Set the secondary DNS for TE200.
·IP Address2
Set the second IP Address for TE200.
·Subnet Mask2
Set the second subnet mask for TE200.
5.1.2 WAN Settings
Figure 5-2
3 connection types are supported: DHCP (obtain an IP automatically), PPPoE,
Static IP Address.
Note:
1.
WAN port is disabled by default.
2.
WAN port cannot be used as a router to route the internet packages from
WAN port to LAN port.
·DHCP
If your ISP says that you are connecting through DHCP or a dynamic IP address
from your ISP, perform these steps:
Step1: Select
DHCP
as the WAN Connection Type.
Step2: Click
Save
button to save the settings.
Step3: Reboot the device.
Step4: Check the WAN’s Status (Status
Network Status).
·Static IP Address
If your ISP says that you are connecting through a static or fixed IP address
from your ISP, perform these steps: