Yeastar TG200 Redundancy
TopView supports redundancy for VOIP/SIP allowing the user to specify a primary and failover SIP Server
or extension.
Single device redundancy
Single device redundancy allows the user to configure a single TG200 device that will failover to a
second SIM card if the primary SIM card is unable to make calls.
Example: cellular account for SIM1 is no longer active because the account was not renewed. TopView
will make calls on SIM2 if calls on SIM1 fail.
Configure two accounts in the TG200, each one tied to a single SIM card.
•
Gateway > Mobile List > Mobile List
o
Trunk for each SIM (e.g., Trunk1 and Trunk2)
•
Gateway > VOIP Settings > VOIP Trunk
o
Two accounts/extensions (e.g., Account1/20001, Account2/20002)
•
Gateway > Route Settings > IP to Mobile
Route each account/extension to a SIM
o
Account1/20001 route to Trunk1/SIM1
o
Account2/20002 route to Trunk2/SIM2
TopView Voice Notification redundancy configuration: use the same SIP Server but different
accounts/extensions for Primary and Backup SIP Servers.
Summary of Contents for TG Series
Page 20: ......
