![background image](http://html1.mh-extra.com/html/yeastar-technology/ta-series/ta-series_how-to-connect_3300382012.webp)
How to Connect Yeastar TA FXS Gateway to 3CX
Path:
Gateway
→
FXS Port List
→
FXS Port List
Figure 18. Edit the FXS Port
Number:
set a number for the FXS port. The number should be different from the
extension numbers on 3CX phone system. Here we set number 500 for FXS port 1.
Primary Server:
choose “3CX(1)”, the VoIP server template configured on step 2.
Dial Pattern Template:
choose the Dial Pattern Template, DialPatternTemplate1(1).
Note:
You don't need to fill in any authentication name and authentication password
on the FXS port edit page if you choose SPS/SPX mode.
After saving and applying the changes, you will see the trunk is “OK” in “Line Status”.
Path
:Status
System Status
Port Status
Figure 19. FXS Port Status
Step 5. Configure the inbound route on 3CX phone system.
Click “Create DID” to configure the inbound route on 3CX.
12/14