Installation_Guide | 1 - Installation Guide | 11
Port
Description
Orange: blinking
The BRI line is disconnected.
BRI
Orange: static
The BRI line is connected or in use.
Red: static
The PSTN line is idle.
Red: blinking slowly
No PSTN line is connected to the
FXO port.
FXO
Red: blinking rapidly
The PSTN line is busy.
Rear Panel
Table 8: Descriptions of S100 Rear Panel
LED
Indication
Status
Description
On
The power is switched on.
POWER
Power status
Off
The power is switched off.
Blinking
The system is running properly.
SYSTEM
System
status
Static/Off
The system goes wrong.
Port
Description
WAN/LAN
Yeastar S100 provides two 10/100/1000Mbps adaptive RJ45 Ethernet ports, and
supports 3 Ethernet modes. The default mode is “Single”.
•
Single
: LAN port will be used for uplink connection. WAN port is disabled.
•
Bridge
: LAN port will be used for uplink connection. WAN port will be used as
bridge for PC connection.
•
Dual
: Both LAN and WAN ports can be used for uplink connection.
