N1 Installation Guide
5
3. Installation
3.1 Placement Instructions
To avoid unexpected accident, personal injury or device damage, please read the
following instructions before installing the N1
3.2 Connect Your N1
Connection of Ethernet Ports
Yeastar N1 provides two10/100M adaptive RJ45 Ethernet ports, LAN and WAN. LAN
port is enabled by default. Connect one end of a network cable to the LAN port of N1,
and the other end to your company
’s switch or router.
Note: if you want to use WAN port, you need to log in the N1 web GUI to enable WAN
port.
Connection of Expansion Units
Yeastar N1 supports 8 expansion ports.
Connect Yeastar VoIP gateways to the expansion ports using RJ-45 network cable.
Power Connection
Connect the power cable to the N1
’s power port, and then plug the power socket into
Ambient Temperature: to avoid overheating, please do not run Yeastar N1
in the place where the ambient temperature is above 104°F (40°C).
Ventilation: please make sure that the device has good ventilation
around.
Anti-jamming: there may be some sources of interference that might
affect the normal running of the N1
. It’s highly recommended that the
device
i.
Should be placed away from high-power radio, radar transmitters
and high frequency, and high-current devices.
ii.
Is using independent power junction box and effective anti-grid
interference measures have been taken.
Mechanical load: Please make sure that the device is placed steadily to
avoid any accident that might cause damage. If placed on the desktop,
please ensure it is horizontally placed.
