Yeastar Technology MyPBX U300, Installation Manual

Page: 5 / 13

MyPBX U300 Installation Guide
http://www.yeastar.com 5/13
Figure 2-3 MyPBX U300 Rear Panel
LED Indication Status Description
Power Power status On The power is switched on
Off The power is switched off
RUN MyPBX status Blinking MyPBX is running properly
Not Blinking/Off MyPBX goes wrong
Ports Description
RJ11 ports FXS port : For the connection of analog phones.
Ethernet ports MyPBX U300 provides two 10/100M adaptive RJ45 Ethernet ports, marked as LAN and
WAN.
-
LAN port : LAN port is for the connection to Local Area Network (LAN).
- WAN port : WAN port is the network port for the connection to internet. It supports ‘DHCP
server’, ‘PPPoE/dynamic DNS’, and “static IP” for IP address assignment.
E1/T1 ports For the connection to E1 line or the E1 port of traditional PBX.
Audio Input
port
For the connection to a music-on-hold source
Audio output
port For the connection to a paging system.
Reset Button Press the reset button to restore the factory defaults
Please make sure that you
’
d like to reset because once reset, the previous
configurations would be erased automatically.
Power port
For the connection of a power adapter to input 100~240V
、
50~60HZ AC power
USB port
Console port For debugging
2.3 Specifications and Operating Environment
Description
Size L213 * W 160 * H 44 (mm)
Power Supply
220V,50
～
60Hz