Yeastar Technology MyPBX-SOHO Administrator'S Manual Download Page 165

Page: 165 / 204

MyPBX SOHO Administrator Guide

165/204

3. Use command

passwd

to change the root’s password

Figure H-3-5

You need to input the new password twice to take effect.

3.3 AMI settings*

The Asterisk Manager Interface (AMI) allows a client program to connect to an Asterisk

instance and issue commands or read events over a TCP/IP stream. Integrators will find

this particularly useful when trying to track the state of a telephony client inside Asterisk,

and directing that client based on custom (and possibly dynamic) rules.

For more information, you can refer to this page:

http://www.voip-info.org/wiki/view/AAPI

Note: this feature is disabled by default; there is no need to enable it for general use. If it’s

enabled, please change account and configure IP restriction.

Summary of Contents for MyPBX-SOHO













































































































































































































Search results

Summary of Contents for MyPBX-SOHO

Reviews:

Yeastar Technology MyPBX-SOHO, Administrator'S Manual, Page: 165 / 204

Search results

Summary of Contents for MyPBX-SOHO

Reviews: