Yeastar Technology MyPBX-SOHO Administrator'S Manual Download Page 135

Page: 135 / 204

MyPBX SOHO Administrator Guide

135/204

Figure B-2 External Storage Setting

Net-Disk Host/IP

: Change this to the IP address of the computer where backup files will

be stored.

Net-Disk Share Name

: Change this to the name of the shared folder where backups will

be stored.

Net-Disk Share Username

: The user name used to log into the network share. Leave

this blank if it is not required

Net-Disk Share Password

: The password used to log into the network share. Leave this

blank if it is not required

Open your Windows share folder to see if the MyPBX backup files and folders has been

created. If the contents of the backup folder look similar to Figure B-3, then you have

successfully configured External storage on the MyPBX unit.

Figure B-3 External storage setting succeeds

Summary of Contents for MyPBX-SOHO













































































































































































































Search results

Summary of Contents for MyPBX-SOHO

Reviews:

Yeastar Technology MyPBX-SOHO, Administrator'S Manual, Page: 135 / 204

Search results

Summary of Contents for MyPBX-SOHO

Reviews: