14
Spectacle lens measurement
Change the lens support to spectacle one, then restart the instrument; the
screen will display according to the "Measurement Mode" parameters.
Contact lens measurement
Change the lens support to contact one, then restart the instrument, the
interface changes to contact lens measurement interface, in such a case, then
interface will not change to any other measurement interface.
●
Other messages and solutions please see "7.2" as a reference.
6.2 Setting Lenses
6.2.1 Set uncut lens
a. Set lens on Lens support
Place the lens center on the Lens support with the convex side up.
b. Fix the lens to Lens support
Raise the lens pressing unit, and then lower it slowly to fix the lens.
●
Lens pushing board is not needed to fix uncut lens.
Fig.6.2.1 a Fig.6.2.1 b
6.2.2 Set framed lens
Fig.6.2.2 a Fig.6.2.2 b
a. Set framed lens
Place the framed lens on Lens support with front surface upward.
b. Move lens pushing board