For a SIP-T48G/T29G/T27P IP phone:
2. Insert the tabs on the wall mount bracket into the
slots on the back of IP phone. And then slide the wall
mount bracket to right.
PUSH
For SIP-T46G/T42G/T41P IP phones:
Wall Mount Quick Installation Guide
www.yealink.com
1. Pull the hookswitch tab in the handset cradle.
2. Rotate the hookswitch tab 180 degrees.
3. Reinsert the hookswitch tab.
The hookswitch tab has a lip which allows the handset to
stay on-hook when the IP phone is mounted vertically.
To adjust the hookswitch tab:
Adjust the hookswitch tab as shown below(Take a
SIP-T46G IP phone as an example):
WALL
WALL
Adjusting the Hookswitch Tab
The IP phone is packaged with the hookswitch tab in
desk mount position. Before mounting the IP phone to
a wall, you must set the hookswitch tab to wall mount
position.
Attaching the Wall Mount Bracket
To attach the wall mount bracket:
1.Pull silica gels out of the two wall mount slots.(Only for
the SIP-T48G IP Phone )
Mounting the Wall Mount Bracket
Yealink provides the wall mount drilling template for each
IP phone model, which locates and marks the position for
mounting the screws (not provided) on the wall, as shown
Summary of Contents for Yealink SIP-T42G
Page 4: ......
