Yealink Yealink SIP-T22P Page 56 User Manual Download

Page: 56 / 146

User Guide SIP-T22P IP Phone

Press the Option soft key, and then select Detail

from the prompt list.

The detailed information of the entry appears on the LCD screen.

To place a call from the call history list:

Press the History soft key.

Press or to switch between All Calls, Placed Calls, Received Calls, Missed
Calls and Forwarded Calls.

Press or to select the desired entry.

Press the Send soft key.

To add a contact to the local directory or blacklist from the call history list:

Press the History soft key.

Press or to switch between All Calls, Placed Calls, Received Calls, Missed
Calls and Forwarded Calls.

Press or to select the desired entry.

Press the Option soft key, and then select Add to Contacts (or Add to Blacklist) from
the prompt list.

Enter the desired values in the corresponding fields, and then press the Save soft
key.

For more information, refer to

Contact Management

on page

To delete an entry from the call history list:

Press the History soft key.

Press or to switch between All Calls, Placed Calls, Received Calls, Missed
Calls and Forwarded Calls.

Press or to select the desired entry.

Press the Delete soft key.

To delete all entries from the call history list:

Press the History soft key.

Press or to switch between All Calls, Placed Calls, Received Calls, Missed
Calls and Forwarded Calls.

Press the Option soft key, and then select Del All from the prompt list.

Press the OK soft key.

The LCD screen prompts "Delete all records?".

Press the OK soft key to confirm the deletion or the Cancel soft key to cancel.

Summary of Contents for Yealink SIP-T22P



















































































































































Search results

Summary of Contents for Yealink SIP-T22P

Reviews:

Related manuals for Yealink SIP-T22P

Brands by name

Popular brands

Yealink Yealink SIP-T22P, User Manual

Search results

Summary of Contents for Yealink SIP-T22P

Reviews:

Related manuals for Yealink SIP-T22P

Brands by name

Popular brands