Yealink Yealink SIP-T22P Page 24 User Manual Download

Page: 24 / 146

User Guide SIP-T22P IP Phone

AC Power

To connect the AC power:

Connect the DC plug on the power adapter to the DC5V port on the phone and
connect the other end of the power adapter into an electrical power outlet.

Connect the included or a standard Ethernet cable between the Internet port on the
phone and the one on the wall or switch/hub device port.

Power over Ethernet

With the included or a regular Ethernet cable, the SIP-T22P IP phone can be powered
from a PoE-compliant switch or hub.

To connect the PoE:

Connect the Ethernet cable between the Internet port on the phone and an
available port on the in-line power switch/hub.

Note

If in-line power switch/hub is provided, you don’t need to connect the phone to the power
adapter. Make sure the switch/hub is PoE-compliant.

The phone can also share the network with another network device such as a PC

(personal computer). It is an optional connection.

Important! Do not unplug or remove power to the phone while it is updating firmware
and configurations.

Summary of Contents for Yealink SIP-T22P



















































































































































Search results

Summary of Contents for Yealink SIP-T22P

Reviews:

Related manuals for Yealink SIP-T22P

Brands by name

Popular brands

Yealink Yealink SIP-T22P, User Manual

Search results

Summary of Contents for Yealink SIP-T22P

Reviews:

Related manuals for Yealink SIP-T22P

Brands by name

Popular brands