Yealink W60P Telesystem, Administrator'S Manual

Page: 22 / 264

Phone Network
15
Phone Network
Yealink IP phones operate on an Ethernet local area network (LAN) or wireless network. You can configure the local
area network to accommodate a number of network designs, which varies by organization and Yealink IP phones.
Topics
IPv4 and IPv6 Network Settings
DHCP Option for IPv4
VLAN
Real-Time Transport Protocol (RTP) Ports
Network Address Translation (NAT)
VPN
Quality of Service (QoS)
802.1x Authentication
TR-069 Device Management
IPv4 and IPv6 Network Settings
Yealink IP Phones support IPv4 addressing mode, IPv6 addressing mode, as well as an IPv4&IPv6 dual-stack addressing
mode.
After connected to the wired network, the phones can obtain the IPv4 or IPv6 network settings from a Dynamic Host
Configuration Protocol (DHCP) server if your network supports it. To make it easier to manage IP settings, we recom-
mend using automated DHCP which is possible to eliminate repetitive manual data entry.
You can also configure IPv4 or IPv6 network settings manually.
Note
Yealink IP phones comply with the DHCPv4 specifications documented in RFC 2131 , and DHCPv6 specifications documented
in RFC 3315 .
Topics
IP Addressing Mode Configuration
IPv4 Configuration
IPv6 Configuration
IP Addressing Mode Configuration
The following table lists the parameters you can use to configure IP addressing mode.
Parameter
static.network.ip_address_mode
[1]
<y0000000000xx>.cfg
Description It configures the IP addressing mode.
Permitted
Values
0 -IPv4
1 -IPv6
2 -IPv4 & IPv6
Default 0
Web UI Network->Basic->Internet Port->Mode(IPv4/IPv6)