Yealink W60P Telesystem, Administrator'S Manual

Page: 132 / 264

Directory
125
version assigned on the LDAP server.
Permitted
Values
2 or 3
Default 3
Web UI Directory->LDAP->Protocol
Parameter ldap.call_in_lookup <y0000000000xx>.cfg
Description It enables or disables the IP phone to perform an LDAP search when receiving an incoming call.
Permitted
Values
0 -Disabled
1 -Enabled
Default 0
Web UI Directory->LDAP->LDAP Lookup For Incoming Call
Parameter ldap.call_out_lookup <y0000000000xx>.cfg
Description It enables or disables the IP phone to perform an LDAP search when placing a call.
Permitted
Values
0 -Disabled
1 -Enabled
Default 1
Web UI Directory->LDAP->LDAP Lookup For Callout
Parameter ldap.ldap_sort <y0000000000xx>.cfg
Description It enables or disables the IP phone to sort the search results in alphabetical order or numerical order.
Permitted
Values
0 -Disabled
1 -Enabled
Default 0
Web UI Directory->LDAP->LDAP Sorting Results
Parameter ldap.incoming_call_special_search.enable <y0000000000xx>.cfg
Description
It enables or disables the IP phone to search the telephone numbers starting with ”+” symbol and “00”
from the LDAP server if the incoming phone number starts with”+” or “00”. When completing the LDAP
search, all the search results will be displayed on the phone screen.
Example :
If the phone receives an incoming call from the phone number 0044123456789, it will search
0044123456789 from the LDAP server first, if no result found, it will 44123456789 from the server
again. The phone will display all the search results.
Note : It works only if “ldap.call_in_lookup” is set to 1 (Enabled). You may need to set “ldap.name_filter” to
be (|(cn=%)(sn=%)(telephoneNumber=%)(mobile=%)) for searching the telephone numbers starting with
”+” symbol.
Permitted
Values
0 -Disabled
1 -Enabled
Default 0
Parameter ldap.customize_label <y0000000000xx>.cfg