Yealink W56P Telesystem User Manual Download Page 73

Page: 73 / 94

Troubleshooting

feature. You can configure a park retrieve key.

To configure a park retrieve via the handset:

Press to enter the main menu.

Select Settings->Shortcut.

The LCD screen displays the changeable shortcuts with features currently assigned
to them.

Press

to highlight the desired shortcut.

Press the Change soft key to access the available features.

The feature currently assigned to the selected key is highlighted and followed by
a left arrow.

Press

to highlight the desired feature.

Press the OK soft key to accept the change or the Back soft key to cancel.

Note

The call park code and park retrieve code

are predefined on the system server. Contact your

system administrator for more information.

Summary of Contents for W56P Telesystem































































































Search results

Summary of Contents for W56P Telesystem

Reviews:

Related manuals for W56P Telesystem

Brands by name

Popular brands

Yealink W56P Telesystem, User Manual

Search results

Summary of Contents for W56P Telesystem

Reviews:

Related manuals for W56P Telesystem

Brands by name

Popular brands