Network Settings
DHCP:
By default, the base station attempts to contact a DHCP server in your network to
obtain the valid network settings, e.g., IP address, subnet mask, gateway address
and DNS address.
Static IP Address:
If the base station cannot contact a DHCP server for any reason, you need
to configure the IP address, subnet mask, gateway address, primary DNS
address and secondary DNS address for the base station manually.
You can configure the base station to obtain network settings in one of the following ways:
5
To configure the network parameters for the base station manually:
1.Press the
OK
key to enter the main menu, and then select
Settings
->
System Settings
->
Network
.
3.Select desired type from the
IP Address Type
field.
2.Enter the system PIN (default: 0000), and then press the
Done
soft key.
4.Make the desired changes.
2.Select the desired base and press the
OK
soft key. The handset begins searching the base.
3.Press the
OK
soft key after searching a base successfully.
4.Enter the base PIN (default: 0000), and then press the
Done
soft key to complete
registeration.
5.Press the
Save
soft key to accept the change.
PPPoE:
If you are using an xDSL modem, you can connect your base station to the Internet
via PPPoE mode. Contact the ITSP for the account and password.
Note:
Wrong network settings may result in inaccessibility of your DECT phone and may have
an impact on the network performance. For more information on these parameters,
contact your system administrator.
Note:
After the success of registration, the handset LCD screen prompts “Handset subscribed”.
If the handset LCD screen prompts “Searching for Base”, please check your base station
if powered on.