Yealink W53P Administrator'S Manual Download Page 41

Page: 41 / 264

Administrator’s Guide for W60P/W53P/W41P DECT Phones

[1]

If you change this parameter, the IP phone will reboot to make the change take effect.

Quality of Service (QoS)

VoIP is extremely bandwidth and delay-sensitive. QoS is a major issue in VoIP implementations, regarding how to guar-

antee that packet traffic is not delayed or dropped due to interference from other lower priority traffic. VoIP can guar-

antee high-quality QoS only if the voice and the SIP packets are given priority over other kinds of network traffic. IP

phones support the DiffServ model of QoS.

Voice QoS

In order to make VoIP transmissions intelligible to receivers, voice packets should not be dropped, excessively delayed,

or made to suffer varying delay. DiffServ model can guarantee high-quality voice transmission when the voice packets

are configured to a higher DSCP value.

SIP QoS

SIP protocol is used for creating, modifying, and terminating two-party or multi-party sessions. To ensure good voice

quality, SIP packets emanated from IP phones should be configured with a high transmission priority.

DSCPs for voice and SIP packets can be specified respectively.

Note

For voice and SIP packets, the IP phone obtains DSCP info from the network policy if LLDP feature is enabled, which takes

precedence over manual settings. For more information on LLDP, refer to

LLDP Configuration

Topic

Voice and SIP QoS Configuration

Voice and SIP QoS Configuration

The following table lists the parameters you can use to configure voice QoS and SIP QoS.

Parameter

static.network.qos.audiotos

[1]

<y0000000000xx>.cfg

Description

It configures the DSCP (Differentiated Services Code Point) for voice packets.

The default DSCP value for RTP packets is 46 (Expedited Forwarding).

Permitted Values

Integer from 0 to 63

Default

Web UI

Network->Advanced->Voice QoS->Voice QoS (0~63)

Parameter

static.network.qos.signaltos

[1]

<y0000000000xx>.cfg

Description

It configures the DSCP (Differentiated Services Code Point) for SIP packets

The default DSCP value for SIP packets is 26 (Assured Forwarding).

Permitted Values

Integer from 0 to 63

Default

Web UI

Network->Advanced->Voice QoS->SIP QoS (0~63)

[1]

If you change this parameter, the IP phone will reboot to make the change take effect.

Summary of Contents for W53P









































































































































































































































































Search results

Summary of Contents for W53P

Reviews:

Related manuals for W53P

Brands by name

Popular brands

Yealink W53P, Administrator'S Manual

Search results

Summary of Contents for W53P

Reviews:

Related manuals for W53P

Brands by name

Popular brands