![background image](http://html1.mh-extra.com/html/yealink/vp530-ip/vp530-ip_administrators-manual_3813049095.webp)
Configuring Basic Features
83
Group pickup is used for picking up incoming calls within a pre-defined group. If there
are many incoming calls at the same time, the user will pick up the call that rang first.
The user can pick up the incoming call using a group pickup key. This feature depends
on support from a SIP server. For many SIP servers, group pickup is implemented
requiring a group pickup code.
Procedure
Group pickup can be configured using the configuration files or locally.
Configuration File
<y000000000023>.cfg
Assign a group pickup key.
For more information, refer to
Local
Web User Interface
Assign a group pickup key.
Navigate to:
http://<phoneIPAddress>/cgi-bi
n/cgiServer.exx?page=Dsskey.
htm
Phone User Interface
Assign a group pickup key.
To configure a group pickup key via web user interface:
1.
Click on DSS Key->Memory Key (or Line Key).
2.
In the desired DSS key field, select Group Pickup from the pull-down list of Type.
3.
Enter the group call pickup code in the Value field.
4.
Enter the key label in the Label field or leave it blank.
Summary of Contents for VP530 IP
