Yealink T5 Series, Administrator'S Manual

Page: 238 / 472

Administrator’s Guide for SIP-T58V/T58A/T56A/CP960 IP Phones
232
Web UI Features->General Information->Allow IP Call
Off Hook Answering
You can set whether to answer an incoming call by picking up the handset, pressing the Speakerphone key or pressing
the HEADSET key directly.
It is not applicable to CP960 phones.
Topic
Off Hook Answering Configuration
Off Hook Answering Configuration
The following table lists the parameter you can use to configure off hook answering.
Parameter features.off_hook_answer.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to answer an incoming call by picking up the handset, pressing the Speak-
erphone key or pressing the HEADSET key directly.
Note : It is not applicable to CP960 phones.
Permitted
Values
0 -Disabled, the user needs to press the corresponding line key, the Answer soft key or the OK key to
answer an incoming call after picking up the handset, pressing the Speakerphone key or pressing the
HEADSET key.
1 -Enabled
Default 1
Auto Answer
Yealink phones support answering a SIP call or an IP address call automatically. Auto answer is configurable on a per-
line basis, while IP address call is not.
Topic
Auto Answer Configuration
Auto Answer Configuration
The following table lists the parameters you can use to configure auto answer.
Parameter
account.X.auto_answer
[1]
<MAC>.cfg
Description
It enables or disables auto answer a SIP call.
Note : The phone cannot automatically answer the incoming call during a call or while dialing even if auto
answer is enabled.
Permitted
Values
0 -Disabled
1 -Enabled, the phone can automatically answer an incoming call.
Default 0
Web UI Account->Basic->Auto Answer
Phone UI Settings->Features->Auto Answer->Account X