Yealink T5 Series, Administrator'S Manual

Page: 111 / 472

Phone Customization
105
Time and Date Manually Configuration
You can set the time and date manually when the phones cannot obtain the time and date from the NTP time server.
The following table lists the parameter you can use to configure time and date manually.
Parameter local_time.manual_time_enable <y0000000000xx>.cfg
Description It enables or disables the phone to obtain time and date from manual settings.
Permitted
Values
0 -Disabled, the phone obtains time and date from NTP server.
1 -Enabled
Default 0
Web UI Settings->Time&Date->Manual Time
Time and Date Format Configuration
You can customize the time and date by choosing between a variety of time and date formats, including options to
date format with the day, month, or year, and time format in 12 hours or 24 hours, or you can also custom the date
format as required.
The following table lists the parameters you can use to configure time and date format.
Parameter local_time.time_format <y0000000000xx>.cfg
Description It configures the time format.
Permitted
Values
0 -Hour 12, the time will be displayed in 12-hour format with AM or PM specified.
1 -Hour 24, the time will be displayed in 24-hour format (for example, 2:00 PM displays as 14:00).
Default 1
Web UI Settings->Time&Date->Time Format
Phone UI Settings->Basic Settings->Time&Date->Time & Date Format->Time Format
Parameter local_time.date_format <y0000000000xx>.cfg
Description It configures the date format.
Permitted
Values
0 -WWW MMM DD
1 -DD-MMM-YY
2 -YYYY-MM-DD
3 -DD/MM/YYYY
4 -MM/DD/YY
5 -DD MMM YYYY
6 -WWW DD MMM
Use the following mapping:
“WWW” represents the abbreviation of the week;
“DD” represents a two-digit day;
“MMM” represents the first three letters of the month;