Yealink T27P, User Manual

Page: 94 / 131

Yealink T5 Series IP Phones User Guide
90
Parking or Retrieving a Call in the FAC Mode
Parking or Retrieving a Call in the Transfer Mode
Parking or Retrieving a Call with a Park/Retrieve Key
Parking or Retrieving a Call in the FAC Mode
Your system administrator sets up the FAC mode in which you can park and retrieve a call on your phone.
Topics
Parking a Call in the FAC Mode
Retrieving a Parked Call in the FAC Mode
Parking a Call in the FAC Mode
Before You Begin
Your system administrator has set call park in the FAC mode.
Procedure
1. During a call, press Park (You may need to press the More soft key to see the Park soft key).
The phone will dial the configured call park code.
2. Do one of the following:
l
If you want to park the call against the local extension, press the # key.
l
If you want to park the call against a desired extension, enter the extension (for example, 4606) where you want
to park the call and press the # key.
If the call is parked successfully, you will hear a voice prompt confirming that the call is parked. The call is parked
against the specified extension.
Tip
You can use a Park key or a BLF key to park a call to a specific contact directly.
Related Topics
Parking or Retrieving a Call with a Park/Retrieve Key
Parking/Retrieving a Call by BLF Key
Retrieving a Parked Call in the FAC Mode
Before You Begin
Your system administrator has set call park in the FAC mode. There is a call parked on the extension.
Procedure
1. Press Retrieve (You may need to press the More soft key to see the Retrieve soft key) on the pre-dialing screen.
The phone will dial the park retrieve code which is configured in advance.
2. Follow the voice prompt to retrieve:
l
Press the # key on the phone where the call is parked.
l
Enter the desired extension followed by # (for example, 4606#) on any phone.