Yealink SIP-T54S User Manual Download Page 120

Page: 120 / 131

Yealink T5 Series IP Phones User Guide

116

Bluetooth Headset

You can use a Bluetooth headset to handle calls on the IP phone. If both a Bluetooth headset and an analog headset

are connected, only the Bluetooth headset can be used.

For more information, refer to the documentation from your Bluetooth headset manufacturer.

Deleting the Paired Bluetooth Device

Disconnecting the Bluetooth Device

Analog Headset

USB Headset

You can use a USB headset to handle calls on the IP phone.

For a list of supported headsets, refer to

Tested headset list compatible with Yealink IP Phone

for your IP phone on

Yealink Support

. USB headsets that are not listed may not function properly if you connect them to your IP phone.

For more information on how to use your USB headset, refer to the related documentation from the manufacturer.

Connecting a USB Headset

Procedure

Simply insert the headset connector into the USB port on the back of your IP phone.

For the information on how to connect a USB headset, see the Quick Start Guide for your IP phone on

Yealink Sup-

port

Using Headsets

You can use only one headset at a time. The IP phone will use the headset according to the priority: USB/Bluetooth

headset>YHS32/YHS33/wireless headset.

Topics

Activating the Headset Mode

Deactivating the Headset Mode

Switching Among the Handset, Speakerphone and Headset Modes

Placing Calls

Answering Calls

Activating the Headset Mode

After connecting a headset to your phone, you can activate the headset mode and use the headset when answering

and placing calls.

Procedure

Press the HEADSET key on the phone.

The HEADSET key LED glows green, and the headset icon appears on the LCD screen.

Note

You can initiate or end calls by pressing the HEADSET key. Check with your system administrator to find out if it is available

on your phone.

Summary of Contents for SIP-T54S




































































































































Search results

Summary of Contents for SIP-T54S

Reviews:

Brands by name

Popular brands

Yealink SIP-T54S, User Manual

Search results

Summary of Contents for SIP-T54S

Reviews:

Brands by name

Popular brands