Yealink SIP-T53, Quick Start Manual

Page: 7 / 52

3
3. Enter the user name (default: admin) and password (default: admin) in the login page and click Confirm
.
Network Settings:
Click on
Network
->
Basic
->
IPv4 Config
You can configure the network settings in the following ways:
DHCP: By default, the phone attempts to contact a DHCP server in your network to obtain its valid network settings, e.g., IP
address, subnet mask, gateway address and DNS address.
Static IP Address: If your phone cannot contact a DHCP server for any reason, you need to configure the IP address, subnet
mask, gateway address, primary DNS address and secondary DNS address for the phone manually.
Account Settings: Click on Account -> Register -> Account X (X=1, 2, 3...11, 12)
Parameters of the account:
Register Status: It shows the register status of the current account.
Line Active: You can select Enabled/Disabled to enable/disable the account.
Label: It is shown on the LCD screen to identify the account.
Display Name: It is shown as caller ID when placing a call.
User Name: It is provided by ITSP for registration (required).
Register Name: It is an authenticated ID for authentication provided by ITSP (required).
Password: It is provided by ITSP for registration (required).
Server Host: It is provided by ITSP for registration (required).
Register status icons on the LCD screen:
Registered Register Failed Registering
Configuring via phone user interface
Network Settings:
Press the Menu soft key when the phone is idle, select Advanced (default password: admin)-> Network -> WAN Port/VLAN/Web Server/
802.1x/VPN/LLDP/CDP/NAT
to configure the network.
Account Settings:
Press the Menu soft key when the phone is idle, select Advanced (default password: admin)-> Accounts to configure the account.
Note: For more information on account parameters, refer to Configuring via web user interface above.
"192.168.0.10") and then press the
Enter
.
E
N
G
L
I S
H
Note: The IP phone also supports IPv6, but IPv6 is disabled by default.
The wrong network settings may result in the inaccessibility of your phone and may have an impact on the network
performance. Contact your system administrator for more information.
Note: Check with your system administrator if any error appears during the registration process or a specific
configuration is required for your registration.