background image

login screen. Example: http://192.168.1.22.

Log in to the phone's web administration interface with your username and password. Please

note that the factory default login details are as follows: username is admin and password is
admin.

DHCP Server

Fully configured and operational DHCP server.

PBXware Version

PBXware version 

5.3.6

In order to find out the PBXware version:

Log in to PBXware

Navigate to Settings: About.

On the top of About page, you may see a code similar to this one PBXware Edition: Business,
Release: 

5.3.6

 (387597b7), Running: 1.8.32.1-gc-b47edc45, PBXware Proxy v5.3.6

(62b7bcd), API: 5.3, libmemcached version: 1.0.14, where Release denotes the current
version of your PBXware.

Installation

This section describes how to install and connect the phone to the electrical power and data
network as well as how to apply factory settings.

The following topics are covered:

Power Adapter

Power over Ethernet (PoE)

Factory Settings

Power Adapter

Connect the Network and Power

Connect the DC plug on the power adapter to the DC port on the phone and connect the other

end of the power adapter into an electrical power outlet.

Connect the Ethernet cable between the Internet port on the phone and the network port on a

router or switch to access LAN.

NOTE: 

 If you are using Power over Ethernet (PoE), you don't need to connect the AC adapter.

Make sure that the Ethernet cable and router or switch is Power over Ethernet (PoE) compliant.

Power over Ethernet (PoE)

Connect the Network (only)

Using a regular Ethernet cable, your phone can be powered from a Power over Ethernet (PoE)

Summary of Contents for SIP-T43U
















Reviews: