background image

You will have to wait some time for the device to save changes.

Click the Auto Provision button to run the Auto provisioning process, after which you will be

asked to confirm the action. To continue, click the OK button.

The Auto provisioning process will start during the phone's reboot process, The phone will

pick up an appropriate configuration file from PBXware. If everything is done as described
above, you should have successfully registered your phone to PBXware.

Dial *123 to verify registration.

Configure BLF

This section describes how to configure BLF (Busy Lamp Field) for Yealink T43U.

The following topics are covered:

- Extension Settings

- Phone Settings

Extension Settings

Log in to the PBXware's web administration interface

Open a new browser window and enter the IP address in order to access the PBXware's web

administration login page. Example: http://192.168.1.10.

Log in to PBXware with your e-mail address and password.

Edit Extension.

On the Extensions page, click the Edit icon corresponding to your Extension.

Click the Advanced Options button.

Navigate down to the Auto Provisioning and Presence group of settings.

Make sure that Auto Provisioning is set to Yes.

Make sure that Presence is set to "Yes".

Click the Save button in order to save changes.

Click the Enhanced services.

Click the Directory / BLF List check box and click the Save button in order to enable this

feature.

Click the Directory / BLF List Edit button.

Enter the user's Extension number and click the BLF check box.

Click the Save button.

Summary of Contents for SIP-T43U
















Reviews: