Yealink SIP-T38G, Administrator'S Manual

Page: 81 / 402

Administrator’s Guide for SIP-T3xG IP Phones
68
3. (If enabled) Enter the desired delay time in the Inter Digit Time (1~14) (seconds)
field.
4. Click Confirm to accept the change.
The Call waiting feature enables the IP phone to receive a new call when there is an
active call. The new call is presented to the user visually on the LCD screen. The call
waiting tone feature enables the IP phone to play a short tone when receiving a new
incoming call during a conversation. The tone is audible to remind the user of the new
incoming call. The call waiting tone feature works only if the call waiting is enabled.
Procedure
Call waiting and call waiting tone can be configured using the configuration files or
locally.
Configuration File <y0000000000xx>.cfg
Configure the call waiting
feature.
For more information, refer to Call
Waiting on page 250 .
Local Web User Interface
Configure the call waiting
feature.
Navigate to:
http://<phoneIPAddress>/cgi-bin/