Yealink SIP-T38G, Administrator'S Manual

Page: 243 / 402

Administrator’s Guide for SIP-T3xG IP Phones
230
0-Disabled
1-Enabled
Example network.pc_port.dhcp_server = 1
Parameter-
network.dhcp.start_ip
Configuration File
<y0000000000xx>.cfg
Description
Configure the start IP address that the IP
phone assigns for the PC attached to the PC
port when the PC port is configured as Router.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Format IP Address
Default Value 10.0.0.10
Range Not Applicable
Example network.dhcp.start_ip = 10.0.0.10
Parameter-
network.dhcp.end_ip
Configuration File
<y0000000000xx>.cfg
Description
Configure the end IP address that the IP phone
assigns for the PC attached to the PC port
when the PC port is configured as Router.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Format IP Address
Default Value 10.0.0.100
Range Not Applicable
Example network.dhcp.end_ip = 10.0.0.100